Everyone probably knows what USB stands
for, universal serial bus. It’s one of those abbreviations that’s so
commonplace, its become part of our daily life. Like the name implies,
USB is truly universal. It is one of the most versatile communication
protocols in the world today. Encompassing devices of all shapes and
sizes, USB connectors are found on computers, televisions, photo frames
and whatnot! Originally started as an attempt to facilitate easier
connections between devices and computers, it has now become the
standard connection interface. Now, when you go out to get yourself a
new device, lets say an external hard drive, you’ve probably come across
a few that boast of “USB 3.0 support”. Also, these devices are slightly
more expensive. So what’s it all about?
The tech world has a penchant for adding
larger numbers to software and hardware alike, and often, it’s hardly a
change. But that’s not the case this time around, USB 3.0 is quite an
improvement over its predecessor. Although introduced back in 2008, USB
3.0 devices and capable computers have started breaching the mainstream
market only in the recent past. It’s hardly been long since USB 3.0
devices don’t burn large holes in your pocket.
USB 1.0 and 1.1
Back in 1996, USB 1.0 was introduced
with a max. data transfer rate of 12Megabit/s. It had quite a few
limitations and didn’t really catch on. Almost 2 years later in August
1998, USB 1.1 was introduced. It fixed some limitations of connectivity
and made the protocol more practical. This was the earliest version of
USB that caught on. Devices and computers started using it and the then
widely used serial ports began to see a decline.
USB 2.0
Again 2 years later, in 2000 USB 2.0 was
released. It is still used today is one of the rare instances where
technology doesn’t change for quite some time. So USB 2.0 brought with
it a host of new features. The main one was of course, speed. USB 2.0 is
capable of data transfer of 480 Mbits/sec or 60MB/sec. That meant it
was almost 10 times faster than the previous version! It was thus dubbed
“Hi-Speed”. USB 2.0 devices and computers flooded the market pretty
soon and they became the standard connection protocol pretty soon. Until
2006, USB 2.0 was tweaked internally for more efficient power usage and
other enhancements were made. Also, form factors and new connectors
were added. In December 2006, one of the most important features used
today was added. The feature was USB On-The-Go. This allowed USB devices
to communicate with each other without requiring a full time host. To
make it clearer, know how USB drives can be connected to tablet PC’s,
PDA’s or other such devices? This is made possible because of USB
On-The-Go. 2007 saw another very useful feature being intoduced, USB
charging. Now devices could draw power and still transfer data
effectively. In the years after, USB 2.0 was improved to consume less
power and have in idle mode where they didn’t draw power. The last
revision/upgrade to USB 2.0 was back in 2010.
USB 3.0
In 2008, USB 3.0 was released. It was
capable of data transfers upto 5Gbits/sec or 625MB/sec, was more power
efficient and is backwards compatible with USB 2.0. USB 3.0 was termed
as “SuperSpeed”. USB 3.0 ports look quite similar to USB 2.0 ports, but
feature 9 pins instead of 4 found in 2.0. USB 3.0 operates in
full-duplex mode, unlike USB 2.0 (half-duplex). This means, data upload
and download can take place simultaneously without slowdown. When
initially introduced, USB 3.0 didn’t see much mainstream support and
industry biggies like Intel and Apple didn’t start USB 3.0 support until
2011. This significantly increased market adoption time. Most
conglomerates decided to wait for data communication protocols like SATA
3.0, PCIe 3.0 and USB 3.0 to mature before extending their support.
Even now, there are some driver problems and Windows 7 doesn’t natively
support USB 3.0. But Windows 8 is slated to fully support USB 3.0.
Now, its rather well known that what you
see is not always what you get. Case in point here is the USB
interface. Although USB 2.0 claimed data transfer speeds of 60MB/s,
practically you can get speeds of upto 40MB/s, even on computers with
all the bells and whistles. USB 3.0 is capable of upto 625MB/s
transfers, but in the real world, you’ll be lucky to see anything in
excess of 300MB/s or so. This is mainly the fault of compatibility with
the OS. Most drivers are still faulty and the full potential of USB 3.0
hasn’t been unlocked yet. So is it worth putting some extra moolah to
get USB 3.0 capable controllers or devices? It probably is, according to
us. You won’t be spending a truckload of money, yet you will have the
advantages of speed and efficiency. Getting a new computer? Make sure
you get a motherboard capable of handling USB 3.0. If you’re not getting
a new computer and still want to jump on the USB 3.0 bandwagon, get
yourself a USB 3.0 external card that attaches to a PCIe slot on your
motherboard and provides USB 3.0 ports. These cards come for around 50$
or so. Sure, the world isn’t switching to USB 3.0 this very moment, but
it doesn’t hurt to be future proof, would it? Do you think it’s worth
the upgrade? Drop us a line and let us know what you think about this
USB 2.0 vs USB 3.0 post.
More
over, Penta TPAD IS701R is a Powerful tablet with an amazing and
affordable price of Rs:3250. It has Android 2.3 OS pre-installed into
it. And a 7” resistive touch screen (TFT Display) with a 1GHz processor
and inbuilt DDR II 256Mb RAM. The Penta TPAD IS701R can give you the
best performance in the entry level category. You can control it with
your single finger touch mode and browse the web wirelessly. Also you
can enjoy media playback in your Penta TPAD IS701R. The built in 2GB
memory can be expanded up to 32GB by using the on-board TF card slot.
Apart from these above mentioned features, there are few other amazing
features like.
